Discontinued Products
The following products are discontinued:
| Discontinued Product | Replacement Product | |
|---|---|---|
| ComView | ComView IP | |
| ComView SR | ComView IPs | |
| Vecta ST | ComView IPs | |
| Vecta CM | ComView IPs | |
| Xypha ST | ComView SM |
 |
|
|
|
 |
|
||
 |
 |
 |
|
 |
 |
|
|
Product Documentation
Copies of ComView product documents are available by selecting the link on the required document:
| Remas | |
REMAS Database Security |
AN20-000 |
Describes how to set up the REMAS database access security mechanism. |
|
| Top | |
| ComView IP | |
Telnet Connections via ComViewIP LAN Ports |
AN30-000 |
Describes how to setup ComView IP to establish a telnet connection to LAN based target equipment via ComView IP LAN ports using SSH. |
|
ComView IPx Switching Ports |
AN30-001 |
Describes how to setup and use the ComView IPx switching ports. |
|
ComView IP ADSL Modem Setup |
AN30-002 |
Describes how to install and setup an ADSL modem for use with ComView IP. |
|
ComView IP IPsec VPN Setup |
AN30-003 |
Describes how to set up and initiate a PC to ComView IP and a ComView IP to ComView IP IPsec VPN connection. |
|
| Top | |
| ComView - Software Release 18 | |
| ComView Alarm Qualification & Classification | AN10-000 |
Describes how to set up the ComView alarm qualification and classification patterns for release 18 software. |
|
| ComView Alarm Reporting & Response | AN10-001 |
Describes how to setup the ComView reporting and response functions for release 18 software. |
|
| ComView Script-based Equipment Interaction | AN10-002 |
Describes how to set up ComView to execute script-based interaction with connected equipment to perform predefined tasks. |
|
| Transferring Files Using ComView | AN10-003 |
Describes how to setup ComView to transfer files between the host and the connected equipment. |
|
| ComView: Setting up a User Profile | AN10-004 |
Describes how to set up ComView user profiles. |
|
| Creating PERL Scripts for ComView | AN10-005 |
Describes how to cerate PERL scripts for use in ComView. |
|
| Threshold detection & Equipment Control Using ComView | AN10-006 |
Describes how to setup ComView to detect thresholds and react by controlling associated equipment. |
|
| Remote Control of Equipment Using ComView | AN10-007 |
Describes how to set up ComView to control remote equipment. |
|
| Setup & Establishing a Dial-up PPP Connection Using ComView | AN10-008 |
Describes how to setup and establish a PPP dialup connection with ComView. |
|
| ComView Intelligent Alarm Handling: Scenario 1 – Automatic Alarm Reset | AN10-015-S1 |
Describes a ComView alarm-handling scenario that may or may not be subsequently resolved. |
|
| ComView Intelligent Alarm Handling: Scenario 2 – Status Message Verification | AN10-015-S2 |
Describes a ComView alarm-handling scenario that identifies whether a status message has been received by a specified time. |
|
| Top | |
| ComView - Software Release 19 | |
ComView Alarm Qualification & Classification |
R19-AN10-000 |
Describes how to set up the ComView alarm qualification and classification patterns for release 19 software. |
|
ComView Alarm Reporting & Response |
R19-AN10-001 |
Describes how to setup the ComView reporting and response functions for release 19 software. |
|
ComView SNMP Trap Detection & Alarm Format Transformation |
R19-AN10-009 |
Describes how ComView can be setup to detect SNMP Traps on a network and report the occurrences. |
|
ComView SMS Alarm Notification |
R19-AN10-010 |
Describes how to set up ComView to send sms message alarm notifications. |
|
ComView AAA Setup |
R19-AN10-011 |
Describes how to set up ComView to provide authenticated, authorized and accounting access. |
|
CDR Data Collection from a PBX TCP Port Using ComView |
R19-AN10-012 |
Describes how to set up ComView to collect CDR data from a PBX TCP port. |
|
ComView TCP-based Protocol Monitoring |
R19-AN10-013 |
Describes how to set up ComView to monitor TCP-based protocols on a connected LAN. |
|
Minor Enhancements |
R19-AN10-014 |
Describes minor functional enhancements to the ComView commands. |
|
Alarm Notification via E-mail |
R19-AN10-016 |
Describes how to set up ComView to send e-mail notification of detected alarm events. |
|
Telnet Connections via ComView Ports |
R19-AN10-017 |
Describes how to establish a telnet connection to LAN based target equipment via a ComView port. |
|
| Top |
|
|
 |
|
 |
|
 |
|
|
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
The following software utilities related to the indicated products are free to be used as needed.
| ComView SM | |
ConnectCV |
ConnectCV |
ConnectCV allows serial port data to be redirected over an IP network between a PC and a ComView SM using TCP with or without VPN. |
|
| Top |
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
|
|
